Zeuke-TT, what's new?

Re: Zeuke-TT, what's new?

Postby MacG » Wed Sep 11, 2019 7:29 am

Thanks for your offer. But I can't buy every car. Because of the lack of enough bucks.
Lok-n-Roll.de - we send worldwide :wink:
User avatar
MacG
 
Posts: 1047
Images: 11
Joined: Mon Aug 15, 2011 1:19 pm
Location: Dresden, Germany

Re: Zeuke-TT, what's new?

Postby j p » Mon Sep 16, 2019 11:33 am

I have promised to make some more CB&Q hoppers for Rob.

CB&Q_hoppers.jpg
j p
 
Posts: 1304
Images: 69
Joined: Sat Jan 30, 2016 5:08 pm
Location: Struer, Denmark

Re: Zeuke-TT, what's new?

Postby rdikken » Wed Sep 18, 2019 10:33 am

Hi Jan,

Looks beautiful. But I have still to update my website. Till now you won't see the C&S 20000, but this weekend that will change.

The fair in Gotha was positive and I could make some assembling agreements about the 2-bay hopper from Ian. They will be produced in a limited quantity. At least when the protype is accepted. The hopper will have an extra weight in it. By doing so it will lose some of the inner details. I would say wait till you see the prototype the end of this year. The car will be expensive and prepared for a MTL coupling. Reading, B&O and Frisco printouts will be provided in small quantities. There will be more, but I will announce that in December.

Ok, next topic, I will provide another car in 2020. Probably a fishbelly 42 / 44 ft flat car.. In this weekend you will see the first prototype. I must say hopper scrap will fit nicely on this car.

Have some fun and lets create more cars. (Ah, a 1000 pcs of a 50 ft boxcar)

Rob
Last edited by rdikken on Sun Sep 22, 2019 9:04 am, edited 1 time in total.
rdikken
 
Posts: 204
Joined: Thu Jul 04, 2013 5:10 pm
Location: Smilde, The Netherlands

Re: Zeuke-TT, what's new?

Postby rdikken » Sun Sep 22, 2019 8:32 am

Some pictures:

The SCL shell on the flat car was a scrap model from JP, where the yellow text was not correct in line with the white layer below.

In the reality hoppers were scrapped as can be seen for BC&Q 172067 in the last picture by use of these flat cars.

The flat car is a prototype with the correct friction bearing 50 ton trucks. The couplings are too low and there is no text printed on fishbelly beam. But this is a project for the end of 2020. First the 2-bay offset hopper.

Rob
Attachments
P1080024.JPG
P1080027.JPG
P1080028.JPG
cb&q172067.jpeg
rdikken
 
Posts: 204
Joined: Thu Jul 04, 2013 5:10 pm
Location: Smilde, The Netherlands

Re: Zeuke-TT, what's new?

Postby MacG » Sun Sep 22, 2019 1:10 pm

The SCL car isn't that badly print on. So the flat car is from Peresvet like I see. The couplings are really low. Perhaps you can switch to an MTL 2004.
Lok-n-Roll.de - we send worldwide :wink:
User avatar
MacG
 
Posts: 1047
Images: 11
Joined: Mon Aug 15, 2011 1:19 pm
Location: Dresden, Germany

Re: Zeuke-TT, what's new?

Postby rdikken » Tue Nov 19, 2019 4:09 pm

A new hopper: the TNO 4781 from 1953 with the "Southern Pacific Lines" logo is on stock. (The SP 440146 is almost sold out.)

To compare this hopper with the SP 440146, both cars are in one picture, which is taken handheld, not 100% sharp, with artificial light making the color not accurate. The SP is pad printed by MTB and the TNO is pad printed by another company. (The printout for both cars are of course created by Richard.)

The SCL and the Chessie with some more Burlingtons are expected to be available in December this year.

Is there a request for a Rock Island version? (Picture is taken with a mobile phone, but it gives an impression.)

Rob
Attachments
P1010443.JPG
RI510409.JPG
rdikken
 
Posts: 204
Joined: Thu Jul 04, 2013 5:10 pm
Location: Smilde, The Netherlands

Previous

Return to Buy, Sell, Trade

Who is online

Users browsing this forum: No registered users and 0 guests