Bigelov's projects

Bill Dixon
Posts: 1450
Joined: Mon Mar 15, 2010 10:57 pm
Location: North Vancouver, B.C.

Re: Bigelov's projects

Post by Bill Dixon » Thu Dec 10, 2020 11:33 pm

Bigelov wrote: Wed Dec 09, 2020 10:52 pm With the SW9 up and running I have moved to Meeker Southern caboose MSN10046, ex Northern Pacific (and then BN) from the late 60's. I posted a part completed 3D drawing on the previous page, and have finished drawing and printing it in parts.

Image
That is a good looking caboose!
Is this a private project or will a few copies be available to interested modellers?
Regards
Bill Dixon
TT-Tracks
North Vancouver, BC

milwrd1
Posts: 330
Joined: Sun Aug 11, 2013 11:07 am
Location: Vicksburg, MS USA

Re: Bigelov's projects

Post by milwrd1 » Fri Dec 11, 2020 3:44 pm

The wire work is very good. :thumbup: I've made some grab irons from brass 0.012 stock and 0.010 stock, it can only be more difficult with the 0.008 wire. 2 questions...Did you use brass or stainless steel wire?? and, the curved grab irons on the sides, what did you use to form the grab irons?? The curves are to good and to consistent to be free formed.

User avatar
Bigelov
Posts: 110
Joined: Wed Sep 04, 2019 4:51 am
Location: Albury Australia

Re: Bigelov's projects

Post by Bigelov » Fri Dec 11, 2020 5:11 pm

The wire I have been using is nickel-silver from Albion Alloys, available locally. I have it in 0.2 (0.008") and 0.33mm (0.013") diameter. I also have some K&S brass and aluminium rod and tube, starting at .5mm (0.020"). I would like to get the wire in phosphor bronze, but will have to order that in so haven't done that yet. Much easier picking stuff up locally. We are very lucky to have two hobby shops in the region!

That Arduino wire bender is a bit crazy! Maybe one day... But I do use jigs for bending when needed. Also a pair of tapered pliers with grooves across to hold the wire nicely. The jigs are just some wire rod in a piece of MDF set at the correct distance to bend around. I also use these sorts of jigs for soldering up the handrails, such as on the ends of the SW9, and on the cryogenic car roof. I will post some pics in due course and describe what I do more fully.

The large curved handrail was bent around a drill bit. It is just over 1/2" diameter, but the nickel silver is very springy, so I had to use a 1/4" drill! First I bent the end 90° and then held that against the drill while using a fingernail to form it around the curve, then bend the other end and cut it off.

With all the things I am making, I am trying to make it re-makable so that others can benefit as well, so I hope to have the caboose available once I have it sorted. Cast in resin, rather than printed (but maybe details printed), perhaps some photoetch if needed (think end platforms). Nothing happens as quick as I would like :) And I still have to work out resin casting and photoetching...

One of the problems is that every RR company had a different caboose. They were all very similar, but different in details. So which one to make? The main differences I have noticed is windows, location of cupola, platform ends and underbody details. This one is based on the NP 10400-10424 series from 1969.
Steve B
Russia in Narrow Gauge
Bigelov's Flickr Account

User avatar
ConducTTor
Site Admin
Posts: 9141
Joined: Sat May 23, 2009 4:52 pm
Location: ATL

Re: Bigelov's projects

Post by ConducTTor » Sat Dec 12, 2020 11:54 am

Bigelov wrote: Fri Dec 11, 2020 5:11 pmI will post some pics in due course and describe what I do more fully.
Looking forward to that :thumbup:
:wave:

milwrd1
Posts: 330
Joined: Sun Aug 11, 2013 11:07 am
Location: Vicksburg, MS USA

Re: Bigelov's projects

Post by milwrd1 » Sat Dec 12, 2020 9:09 pm

The large curved handrail was bent around a drill bit. It is just over 1/2" diameter, but the nickel silver is very springy, so I had to use a 1/4" drill! First I bent the end 90° and then held that against the drill while using a fingernail to form it around the curve, then bend the other end and cut it off.
Thanks for the info on bending the curved caboose grab irons. I'll have to try the nickel-silver material. Generally, I feel the brass I previously used is to soft (easy to bend by susceptible to damage after installation) and the stainless steel is to hard (I've stuck myself more than once bending some of the stainless steel). I also have some 0.010 phosphor bronze, maybe next time I'll give it a try.

User avatar
Bigelov
Posts: 110
Joined: Wed Sep 04, 2019 4:51 am
Location: Albury Australia

Re: Bigelov's projects

Post by Bigelov » Wed Oct 06, 2021 6:40 pm

And for my 100th post...

Although I haven't done much train stuff this year, I have not been totally idle.

A friend of mine is in the 2mm Association, a British based finescale group modelling 2mm to the foot, or 1:152. Well, he is very keen on Victorian Railways (VR) and modeling 2mm in 5" broad gauge, as per VR. And doing photo etch sheets for his interest. So I have tagged along and drew up the details for the Russian Cryogenic car that I built last year. And the etches are great! Most fit beautifully, and can be seen on cryo car #2.

Image

Image

To bend the handrails for the platform at one end I drew up and printed a folding jig, and a jig for the pipe that runs around one of the tank mounts. These are a prettied up, and likely more accurate version of my soldering jigs. I just had to run a drill through the holes to make sure they were the correct size I needed. In this case, a 1.5mm drill for the handrails and 1mm for the pipe.

Image

The main idea with these bending jigs is having a start point and first bend radius built into the jig, with holes for pins at every other bend location. You can see the end of the wire, or photo etch, slides into a slot and the first bend is made and bent until it just passes the first hole, a pin is inserted and the next section bent and repeat until all the bends are made. I bent around a 1.5mm drill in the handrail above, and used pins made from 1mm piano wire for the pipe. After bending it is just a matter of trimming the wire length to suit.
Steve B
Russia in Narrow Gauge
Bigelov's Flickr Account

User avatar
MacG
Posts: 1313
Joined: Mon Aug 15, 2011 1:19 pm
Location: Dresden, Germany

Re: Bigelov's projects

Post by MacG » Thu Oct 07, 2021 4:17 am

This is an interesting tank car, I like the straps which hold the tank to the frame. :thumbup: Nice idea with the bending jigs.
Lok-n-Roll.de - we send worldwide :wink:

User avatar
RodTT
Posts: 469
Joined: Wed Jun 28, 2017 4:06 pm
Location: Northampton, England
Contact:

Re: Bigelov's projects

Post by RodTT » Thu Oct 07, 2021 10:30 am

Lovely work.

User avatar
ConducTTor
Site Admin
Posts: 9141
Joined: Sat May 23, 2009 4:52 pm
Location: ATL

Re: Bigelov's projects

Post by ConducTTor » Fri Oct 08, 2021 1:13 am

The bending jigs are mega.
:wave:

User avatar
Bigelov
Posts: 110
Joined: Wed Sep 04, 2019 4:51 am
Location: Albury Australia

Re: Bigelov's projects

Post by Bigelov » Mon Oct 25, 2021 3:29 am

Some time back I got a Shapeways Russian narrow gauge TU7 body print and I have finally finished detailing it and applied the basic colours. It is shown alongside my old TU7 that I made from styrene.

Image

The new one is only a static model, and will eventually get dirtied up and put on jacks with the bogies rolled out from underneath (shown in a previous state on page 2). With the loco up to this stage I will get back to painting the floor and pits inside of the loco shed so I can get the jacks in place. Apsrt from the jacks I haven't progressed much with interior details.

With the cryo tanker above, on the etch sheet you can see a bunch of small two-pronged fork pieces. They actually solder around the end of the tank bands to make it more three dimensional and more like the original - the strap between the bands and the turnbuckles. You can just make it out in the picture. I will post more on my soldering jigs later this evening.
Steve B
Russia in Narrow Gauge
Bigelov's Flickr Account

Post Reply

Return to “Builders' Corner”