Uhlenbr/Tillig Daisy 2, Piko Smrtcntr. light + Kuehn dec.

Post Reply
Mr Lard
Posts: 1
Joined: Wed Jun 28, 2017 1:31 pm

Uhlenbr/Tillig Daisy 2, Piko Smrtcntr. light + Kuehn dec.

Post by Mr Lard »

Hi all!

After fighting with this issue myself for a week, I thought I would share it in case others have the same problem.

Uhlenbrock/Tillig Daisy II systems, as well as Piko Smartcontrol Light, can have problems noticing Kuehn decoders. In case this happens, you have to seet the LNVC 52 in the central to value 2 (the factory setting is 3). That will make the system discover the decoder. The art.no. of the central is 65200 and the sadress is 1 (the Piko manual omits this).

Hope this will help someone at least!

User avatar
ConducTTor
Site Admin
Posts: 9027
Joined: Sat May 23, 2009 4:52 pm
Location: ATL

Re: Uhlenbr/Tillig Daisy 2, Piko Smrtcntr. light + Kuehn dec

Post by ConducTTor »

The whole point of standards was that everything simply works together. Apparently *some* manufacturers consider this optional :wall:
:wave:

User avatar
CFRiad
Posts: 666
Joined: Sun Nov 23, 2014 7:13 pm
Location: Vancouver, Canada

Re: Uhlenbr/Tillig Daisy 2, Piko Smrtcntr. light + Kuehn dec

Post by CFRiad »

ConducTTor wrote:The whole point of standards was that everything simply works together.
Image

It is a universal truth that Monty Python or xkcd have an answer to any situation.

User avatar
ConducTTor
Site Admin
Posts: 9027
Joined: Sat May 23, 2009 4:52 pm
Location: ATL

Re: Uhlenbr/Tillig Daisy 2, Piko Smrtcntr. light + Kuehn dec

Post by ConducTTor »

:lol: :mrgreen: :wall: :lol:
:wave:

Post Reply

Return to “Electric / DCC”