Start set 01424 power controller listed output specification

Post Reply
User avatar
Rich1853
Posts: 306
Joined: Sun May 20, 2018 6:54 pm
Location: Melbourne, Florida USA.

Start set 01424 power controller listed output specification

Post by Rich1853 »

I finally gotton around with the supplied power controller from my start set. The first thing I did was to get a North American power supply with comparable output specs. I did that a few months ago. With a new MRC power supply purchased and used, everything else stayed in their boxes until today. Matched the outer barrel diameter at 5.5mm and polarity: outer is negative.
Here are the power supply unit specs: Tillig input 230v / 50Hz, output 15,2v DC, max output current 1,9A
power supply from Amazon: input 100-240v 50/60Hz, output 15v DC, 2A
NOW here is power controller (p/n 271471 output voltage: 13v squarewave, pulse frequency: approx 130Hz, output current: 0,5A
Why is the output listed as A.C. like its for DCC when with my calibrated to NIST true RMS DMM reads DC, range -15.18 to 15.18v DC, 0Hz
Rich1853
Greetings from Melbourne, Florida USA
On the Space Coast of Florida

Post Reply

Return to “Electric / DCC”