Two Stall Enginehouse

Re: Two Stall Enginehouse

Postby Bernd » Sun Apr 21, 2019 8:44 am

I just had to make one more with a jig. I was looking at the left over piece of wood with the bore.

Image

I came up with the idea that I could use a thin slice to hold everything together while I soldered it. It worked pretty good.

Image

I'm going to see if I can clean this up better with a fine cut file.

Image

And just to give a size perspective. Here's it sitting on a penny.

Image

Still going to make that jig/fixture in case I have to make more.

Bernd
Image
User avatar
Bernd
 
Posts: 975
Images: 27
Joined: Wed Sep 02, 2015 8:43 am
Location: Rochester, New York

Re: Two Stall Enginehouse

Postby ConducTTor » Sun Apr 21, 2019 11:45 am

Holy Haggis dude. Much respect.


Sent from my iPhone using Tapatalk
What people think: "liberals/conservatives are ruining my country"
What the powerful know: divide and conquer
User avatar
ConducTTor
Site Admin
 
Posts: 8478
Images: 13
Joined: Sat May 23, 2009 4:52 pm
Location: Atlanta GA USA

Re: Two Stall Enginehouse

Postby Bernd » Sun Apr 21, 2019 6:41 pm

ConducTTor wrote:Holy Haggis dude. Much respect.


Thanks Alex. I think you'd be able to do this too once shown how to. Takes a bit of patients though. :wink:

Bernd
Image
User avatar
Bernd
 
Posts: 975
Images: 27
Joined: Wed Sep 02, 2015 8:43 am
Location: Rochester, New York

Re: Two Stall Enginehouse

Postby Bernd » Tue Apr 30, 2019 4:10 pm

Well I’ve got several other projects going at once. While my CNC mill was busy making a jig I got to finishing up planking the walls of the engine house.

Finished up the window on the other end of the engine house.

Image

Once I got the bottom planked I set up a jig for placing the boards around the circular window. It’s glued to the steel with Ileene’s tacky glue so it wouldn’t move. Also added a beam behind the jig after I took the picture.

Image

Once I got the planking up to the window I needed to put a scallop in the wood for a nice fit around the window. I marked approximately the center.

Image

Next I glued a piece of sandpaper around a piece of brass stock that is the same diameter as the window, ½” dia. and sanded a scallop in the wood.

Image

End result is a nice scallop……..

Image

……that will fit around the window.

Image

The wall all done.

Image

And with the second round window installed temporarily.

Image

In a day or two I’ll trim the excess from the boards, paint the round windows and begin to install the large windows.

Until next time. Tanks for stopping by.

Bernd
Image
User avatar
Bernd
 
Posts: 975
Images: 27
Joined: Wed Sep 02, 2015 8:43 am
Location: Rochester, New York

Re: Two Stall Enginehouse

Postby ConducTTor » Wed May 01, 2019 3:57 pm

Fantastical!


Sent from my iPhone using Tapatalk
What people think: "liberals/conservatives are ruining my country"
What the powerful know: divide and conquer
User avatar
ConducTTor
Site Admin
 
Posts: 8478
Images: 13
Joined: Sat May 23, 2009 4:52 pm
Location: Atlanta GA USA

Re: Two Stall Enginehouse

Postby MacG » Thu May 02, 2019 5:00 am

Interesting modeling technique at the window! Great idea!
Lok-n-Roll.de - we send worldwide :wink:
User avatar
MacG
 
Posts: 917
Images: 11
Joined: Mon Aug 15, 2011 1:19 pm
Location: Dresden, Germany

Re: Two Stall Enginehouse

Postby Bernd » Thu May 02, 2019 8:03 am

MacG wrote:Interesting modeling technique at the window! Great idea!


Thank you MacG.
Image
User avatar
Bernd
 
Posts: 975
Images: 27
Joined: Wed Sep 02, 2015 8:43 am
Location: Rochester, New York

Previous

Return to Builders' Corner

Who is online

Users browsing this forum: No registered users and 0 guests