Small switcher

Small switcher

Postby modorney » Sun Nov 20, 2016 8:56 pm

Did I dream it ? Or did someone have a small switcher - SW1200, SW1,, SW7, etc?

Either ready to run, or shapeways body.
modorney
 
Posts: 179
Images: 1
Joined: Tue Mar 10, 2015 6:39 pm
Location: Near San Francisco

Re: Small switcher

Postby areibel » Sun Nov 20, 2016 11:07 pm

No, Not dreaming! There is an SW9 or SW1200 available, not sure if they're available from TT West or not, but they still show up on the Eurotrain Hobby website-
http://www.eurotrainhobby.com/locomotives-tt/c448
They're also still available from Zeuke TT-
http://www.zeuke-tt.com/en/us-tt-models/sw1200-group/
And Mark (CSD) had a stock of them back before he closed Sazmodel, you could try sending him a PM and see if he has any.
areibel
 
Posts: 1700
Images: 7
Joined: Fri Jun 12, 2009 10:12 am
Location: Cambridge Springs PA

Re: Small switcher

Postby modorney » Sun Nov 20, 2016 11:57 pm

Thanks! I am designing a layout, in TT, for the MRH contest. I wanted a short loco, since I'm stuffing lots of cars and spurs into a small space.

Page 13:

http://mrhpub.com/2016-11-nov/online/
modorney
 
Posts: 179
Images: 1
Joined: Tue Mar 10, 2015 6:39 pm
Location: Near San Francisco

Re: Small switcher

Postby ConducTTor » Mon Nov 21, 2016 12:24 am

modorney wrote:Thanks! I am designing a layout, in TT, for the MRH contest.


Hey! That's awesome :thumbup:
What people think: "liberals/conservatives are ruining my country"
What the powerful know: divide and conquer
User avatar
ConducTTor
Site Admin
 
Posts: 8293
Images: 13
Joined: Sat May 23, 2009 4:52 pm
Location: Atlanta GA USA

Re: Small switcher

Postby Bernd » Mon Nov 21, 2016 10:56 am

modorney wrote:Thanks! I am designing a layout, in TT, for the MRH contest. I wanted a short loco, since I'm stuffing lots of cars and spurs into a small space.

Page 13:

http://mrhpub.com/2016-11-nov/online/


As a member of that site also I'll keep my eye on that contest to see if you can win. This will be the first TT scale layout entered in that contest. Wish you best of luck.

Bernd
Image
User avatar
Bernd
 
Posts: 837
Images: 27
Joined: Wed Sep 02, 2015 8:43 am
Location: Rochester, New York

Re: Small switcher

Postby Richard-B » Mon Nov 21, 2016 2:07 pm

areibel wrote:No, Not dreaming! There is an SW9 or SW1200 available, not sure if they're available from TT West
No... TT-West did not carry the MTB SW1200/SW900s... but we did do the artwork for several of them. I'm also working on some decal artwork for re-decorating.

AFIAK... Zeuke is now OOS (Out Of Stock).
There are a few dealers in Germany and elsewhere who may have some left... and manufacturer MTB in Prague had some Conrail units. I don't think a re-run is imminent... but it is always a possibility.
Richard Brennan - http://www.tt-west.com
Somewhere between Shenzhen and Budapest...
User avatar
Richard-B
 
Posts: 841
Images: 1
Joined: Sun Oct 11, 2009 5:29 pm
Location: San Leandro, CA

Re: Small switcher

Postby ConducTTor » Mon Nov 21, 2016 2:53 pm

There is a SOO version at Euro Train Hobby. For other schemes, contact CSD (member on this site). If anyone has them, he will.
What people think: "liberals/conservatives are ruining my country"
What the powerful know: divide and conquer
User avatar
ConducTTor
Site Admin
 
Posts: 8293
Images: 13
Joined: Sat May 23, 2009 4:52 pm
Location: Atlanta GA USA

Re: Small switcher

Postby Bernd » Mon Nov 21, 2016 8:59 pm

ConducTTor wrote: For other schemes, contact CSD (member on this site). If anyone has them, he will.


Speaking of CSD. Haven't seen him on in quite a while.

Bernd
Image
User avatar
Bernd
 
Posts: 837
Images: 27
Joined: Wed Sep 02, 2015 8:43 am
Location: Rochester, New York

Re: Small switcher

Postby modorney » Fri Nov 25, 2016 3:10 pm

http://www.shapeways.com/marketplace/mi ... to%5D=2500

25 percent off today! (Black Friday)
modorney
 
Posts: 179
Images: 1
Joined: Tue Mar 10, 2015 6:39 pm
Location: Near San Francisco

Re: Small switcher

Postby Bernd » Sat Nov 26, 2016 9:22 am

modorney wrote:http://www.shapeways.com/marketplace/miniatures/trains?q=&sort=popularity&facet%5BpdcId%5D%5B%5D=134&facet%5BpdcId%5D%5B%5D=353&facet%5BisCustomizable%5D=0&facet%5Bprice%5D%5Bmin%5D=1&facet%5Bprice%5D%5Bmax%5D=2500&facet%5Bprice%5D%5Bfrom%5D=1&facet%5Bprice%5D%5Bto%5D=2500

25 percent off today! (Black Friday)


Ok, thought I'd see what was available. I liked the Alco PA so I ordered it. Guess what? Nothing like being a guinea pig for some else's design.


Shapeways

Hi,

Thanks again for placing an order with Shapeways. Unfortunately, we are unable to manufacture one of the products in order #1531208.

Given the nature of 3D printing, every now and then we catch designs that are too fragile to create in certain materials. Though we do our best to identify these issues as early as possible, some are only found during the manufacturing process.
• You will not be charged for the following:
• 1x TT Scale ALCo PA-1 in Black Hi-Def Acrylate

You can view the status of your payment on your Order Status Page.

We've already notified the designer that your product could not be manufactured, and you can also contact them using the link above. They can help resolve the issues found during the manufacturing process.

Your satisfaction is our top priority. Email us at service@shapeways.com if you would like help working with the designer or finding another unique product on Shapeways.

Common FAQs
What happens if you can't make my product?
What is a payment authorization?

Kind regards,

The Shapeways Team
service@shapeways.com
Image
User avatar
Bernd
 
Posts: 837
Images: 27
Joined: Wed Sep 02, 2015 8:43 am
Location: Rochester, New York

Next

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 0 guests