Decoders for Tiilig undermounted points motor

Decoders for Tiilig undermounted points motor

Postby Surovi » Tue Feb 06, 2018 1:10 pm

Hi!
Which decoders I can use to control https://www.tillig.com/eng/Produkte/pro ... 86112.html ?
I have a Roco z21 start.

This is one option https://www.modellbahnshop-lippe.com/pr ... odukt.html

It can control two items at the same time but I don`t need that...or do I? :grin:
Surovi
 
Posts: 64
Joined: Fri Nov 03, 2017 9:21 am

Re: Decoders for Tiilig undermounted points motor

Postby MacG » Tue Feb 06, 2018 4:23 pm

Attention, the Uhlenbrock MD-2 (67 200) is a magnetic item decoder. Good for the Tillig switch machine (EW1 turnout controller) 83531 or 83532 . Tillig recommends Lenz Decoder LS100 with adaptor LA010. See page 4 at the Tillig 86112 - Undermounted points operating motor.

From Uhlenbrock the decoder SD-2 (67 600) could be work with motor switch machines or the Qdecoder Z2-8+.

Back to your Question: With it, you can also control two turnouts at different times. Or have you only one turnout?
Lok-n-Roll.de - we send worldwide :wink:
User avatar
MacG
 
Posts: 916
Images: 11
Joined: Mon Aug 15, 2011 1:19 pm
Location: Dresden, Germany

Re: Decoders for Tiilig undermounted points motor

Postby krokodil » Tue Feb 06, 2018 4:40 pm

You can use most of the accessory decoders, like the Uhlenbrock, or WX10 from Tran.
All these accessory decoders have multiple outputs, ie a single decoder can control several switch motors or different switchmotors ( like servos).
Greetings from Austria
E.T.
User avatar
krokodil
 
Posts: 598
Joined: Tue Jan 29, 2013 6:46 pm

Re: Decoders for Tiilig undermounted points motor

Postby Surovi » Tue Feb 06, 2018 4:51 pm

MacG wrote:Attention, the Uhlenbrock MD-2 (67 200) is a magnetic item decoder. Good for the Tillig switch machine (EW1 turnout controller) 83531 or 83532 . Tillig recommends Lenz Decoder LS100 with adaptor LA010. See page 4 at the Tillig 86112 - Undermounted points operating motor.

From Uhlenbrock the decoder SD-2 (67 600) could be work with motor switch machines or the Qdecoder Z2-8+.

Back to your Question: With it, you can also control two turnouts at different times. Or have you only one turnout?


Well...recommendation for the MD-2 I got from Tillig, and recommendation for the SD-1 I got from Uhlenbrock :grin: no one mentioned SD-2 :grin:
I asked about Lenz or Digikeijs but....
I will have 7 turnouts and one uncupling track.
Surovi
 
Posts: 64
Joined: Fri Nov 03, 2017 9:21 am

Re: Decoders for Tiilig undermounted points motor

Postby Surovi » Tue Feb 06, 2018 4:53 pm

krokodil wrote:You can use most of the accessory decoders, like the Uhlenbrock, or WX10 from Tran.
All these accessory decoders have multiple outputs, ie a single decoder can control several switch motors or different switchmotors ( like servos).


Thanks!
Can you suggest exact models?
Surovi
 
Posts: 64
Joined: Fri Nov 03, 2017 9:21 am

Re: Decoders for Tiilig undermounted points motor

Postby Surovi » Tue Feb 06, 2018 4:58 pm

Surovi
 
Posts: 64
Joined: Fri Nov 03, 2017 9:21 am

Re: Decoders for Tiilig undermounted points motor

Postby krokodil » Tue Feb 06, 2018 5:23 pm

IMG_2901.JPG
Acc dec pol


Surovi wrote:
krokodil wrote:You can use most of the accessory decoders, like the Uhlenbrock, or WX10 from Tran.
All these accessory decoders have multiple outputs, ie a single decoder can control several switch motors or different switchmotors ( like servos).


Thanks!
Can you suggest exact models?


As mentioned before, almost each manufacturer has accessory decoders. There are two many to list each.
I just mentioned the WX-10 from http://www.tran.at I have some experiences, they have a new version with 4 relays on the board offering drive and polarisation for 4 switches.
Greetings from Austria
E.T.
User avatar
krokodil
 
Posts: 598
Joined: Tue Jan 29, 2013 6:46 pm

Re: Decoders for Tiilig undermounted points motor

Postby Surovi » Tue Feb 06, 2018 5:29 pm

Thanks!
Surovi
 
Posts: 64
Joined: Fri Nov 03, 2017 9:21 am

Re: Decoders for Tiilig undermounted points motor

Postby MacG » Wed Feb 07, 2018 12:05 pm

The schematics for a cheap motor switch adaptor like Lenz LA010 you can get here. My recommendation for Lenz and Qdecoder I have already posted. :wink:
Lok-n-Roll.de - we send worldwide :wink:
User avatar
MacG
 
Posts: 916
Images: 11
Joined: Mon Aug 15, 2011 1:19 pm
Location: Dresden, Germany

Re: Decoders for Tiilig undermounted points motor

Postby Surovi » Wed Feb 07, 2018 1:00 pm

Thanks!
What about Lenz LS 150?
http://www.lenzusa.com/1newsite1/Manuals/LS150.pdf

Look at page 14 of 16:
https://vasutmodell.com/pics/tt-tillig- ... 338458.pdf

LS 150 is recommended.
Surovi
 
Posts: 64
Joined: Fri Nov 03, 2017 9:21 am

Next

Return to Electric / DCC

Who is online

Users browsing this forum: No registered users and 0 guests